Jaguar J-221 MIL-I-23053/5

Description: Jaguar J-221 shrink tubing is an electrical grade polyolefin product rated for -55°c to 135°c continuous operation and can stand elevated temperatures of 300°c for short periods. It is typically used as a shrink fit wire harness cover and insulator over splices and terminations. Minimum shrink temperature is 121°c.

Specification: MIL-I-23053/5, CLASS 1, 2; AMS-3636; AMS-3637; UL; CSA.

Material: Polyolefin, Shrink ratio 2:1, unprinted.†

Temperature Rating: -55°c to 135°c.

Standard Colors: (class 1, flame retardant) 3/64″ – 4″ black, White, red, blue, yellow, other colors available. 5″ black only. (class 2, non-flame retardant) 3/64″ – 5″ clear.

Packaging:4 foot lengths and reels.*

Ordering Information: Specify Jaguar catalog no.,
Packaging and color code.

    ORDER EXPANDED I.D. RECOVERED I.D. RECOVERED WALL
CATALOG NO. CATALOG NO. SIZE (MINIMUM) (MAXIMUM) (NOMINAL)
4 FT LENGTHS REELS in. in. (mm) in. (mm) in. (mm)
J-221 LU 3/64 J-221 RU 3/64 3/64 .046 (1,17) .023 (0,58) .016 (0,41)
J-221 LU 1/16 J-221 RU 1/16 1/16 .063 (1,60) .031 (0,79) .017 (0,43)
J-221 LU 3/32 J-221 RU 3/32 3/32 .093 (2,36) .046 (1,17) .020 (0,51)
J-221 LU 1/8 J-221 RU 1/8 1/8 .125 (3,18) .062 (1,57) .020 (0,51)
J-221 LU 3/16 J-221 RU 3/16 3/16 .187 (4,75) .093 (2,36) .020 (0,51)
J-221 LU 1/4 J-221 RU 1/4 1/4 .250 (6,35) .125 (3,18) .025 (0,64)
J-221 LU 3/8 J-221 RU 3/8 3/8 .375 (9,53) .187 (4,75 .025 (0,64)
J-221 LU 1/2 J-221 RU 1/2 1/2 .500 (12,70) .250 (6,35) .025 (0,64)
J-221 LU 3/4 J-221 RU 3/4 3/4 .750 (19,05) .375 (9,53) .030 (0,76)
J-221 LU 1 J-221 RU 1 1 1.000 (25,40) .500 (12,70) .035 (0,89)
J-221 LU 1 1/2 J-221 RU 1 1/2 1 1/2 1.500 (38,10) .750 (19,05) .040 (1,02)
J-221 LU 2 J-221 RU 2 2 2.000 (50,80) 1.000 (25,40) .045 (1,14)
J-221 LU 3 J-221 RU 3 3 3.000 (76,20) 1.500 (38,10) .050 (1,27)
J-221 LU 4 J-221 RU 4 4 4.000 (101,60) 2.000 (50,80) .055 (1,40)
J-221 LU 5 J-221 RU 5 5 5.000 (127,00) 2.500 (63,50) .060 (1,52)
†PRINTING IS AVAILABLE, CONSULT FACTORY IF REQUIRED.
* ALSO AVAILABLE AS CUT PIECES, CONSULT FACTORY.

PHYSICAL TENSILE STRENGTH 2400 PSI

ULTIMATE ELONGATION 400%

LONGITUDINAL CHANGE ± 5%

SECANT MODULUS (2%) 1.7X104 PSI

SPECIFIC GRAVITY 1.3 (BLACK)

.93 (CLEAR)

HEAT AGING ELONGATION

(336 HRS. @ 175°C) 175%

HEAT SHOCK NO DRIPPING

(4 HRS @ 250°C) OR CRACKING

PASSES MANDREL WRAP TEST

LOW TEMPERATURE FLEXIBILITY

(4 HRS @ -55°C) NO CRACKING

FLAMMABILITY SELF EXTINGUISH

MEETS UL 224 ALL-TUBING

FLAME TEST (CLASS 1 ONLY)

ELECTRICAL

DIELECTRIC STRENGTH 900 V/MIL

VOLUME RESISTIVITY 1015OHM-CM

CHEMICAL

CORROSIVE EFFECT NON-CORROSIVE

SOLVENT RESISTANCE

TENSILE STRENGTH 1000 PSI

DIELECTRIC STRENGTH 400 V/MIL

WATER ABSORPTION 0.2%

FUNGUS RESISTANCE NON-NUTRIENT

* ALSO AVAILABLE AS CUT PIECES, CONSULT FACTORY.
PROPERTIES INFORMATION IS TYPICAL DATA ONLY AND SHOULD NOT BE USED FOR SPECIFICATION REQUIREMENTS.



Back to the Tubing Page
Back to the Products Page