Description: Jaguar J-300 tubing is an electrical grade semi-rigid, co-extruded tubing that provides a meltable inner wall. It is rated for continuous operation at -55°c to 110°c and can stand elevated temperatures for brief periods. When heated above 135°c, the inner meltable wall softens and is forced into contact with the covered product as the outer tube shrinks. When the J-300 tubing cools, it provides a tough coating that is very resistant to chemicals and moisture. Typical applications include electrical and mechanical assemblies, breakouts and end sealing of cables and rigid tubings.
Specification: MIL-I-23053/4, CLASS 1; AMS-3634.
Material: Adhesive-lined Polyolefin, Shrink Ratio 2.5:1.
Temperature Rating: -55°c to 110°c.
Standard Colors: Black. In addition, the following colors
Are available in the sizes listed: 1/8″ – brown, 3/16″ – gray,
1/4″ – white, 3/10″ – blue, 3/8″ – red, 1/2″ – blue, 3/4″ – yellow. Other colors available on special order subject to minimum quantities.
Packaging: 4 foot lengths.*
Ordering Information: Specify jaguar catalog no. And color.
| |
|
|
|
|
|
TOTAL |
MELTABLE |
| |
|
|
|
|
|
RECOVERED |
RECOVERED |
| |
ORDER |
EXPANDED I.D. |
RECOVERED I.D. |
WALL THICKNESS |
WALL THICKNESS |
| CATALOG NO. |
SIZE |
MINIMUM |
MAXIMUM |
(NOMINAL) |
(NOMINAL) |
| 4 FT LENGTHS |
in. |
in. |
(mm) |
in. |
(mm) |
in. |
(mm) |
in. |
(mm) |
|
J-300 LU 1/8 |
1/8 |
.125 |
(3,18) |
.023 |
(0,58) |
.038 |
(0,97) |
.020 |
(0,51) |
|
J-300 LU 3/16 |
3/16 |
.187 |
(4,75) |
.060 |
(1,52) |
.043 |
(1,09) |
.025 |
(0,64) |
|
J-300 LU 1/4 |
1/4 |
.250 |
(6,35) |
.080 |
(2,03) |
.047 |
(1,19) |
.027 |
(0,69) |
|
J-300 LU 3/10 |
3/10 |
.300 |
(7,62) |
.050 |
(1,27) |
.100 |
(2,54) |
.065 |
(1,65) |
|
J-300 LU 3/8 |
3/8 |
.375 |
(9,53) |
.130 |
(3,30) |
.050 |
(1,27) |
.030 |
(0,76) |
|
J-300 LU 1/2 |
1/2 |
.500 |
(12,70) |
.195 |
(4,95) |
.055 |
(1,40) |
.035 |
(0,89) |
|
J-300 LU 3/4 |
3/4 |
.750 |
(19,05) |
.313 |
(7,95) |
.065 |
(1,65) |
.040 |
(1,02) |
|
J-300 LU 1 |
1 |
1.000 |
(25,40) |
.400 |
(10,16) |
.075 |
(1,91) |
.040 |
(1,02) |
|
| PHYSICAL
TENSILE STRENGTH 2200 PSI
ULTIMATE ELONGATION 400%
LONGITUDINAL CHANGE +1,-10%
SECANT MODULUS (2%) 27,000 PSI
SPECIFIC GRAVITY 1.0
† HEAT AGING ELONGATION
(168 HRS. @ 175°C) 175%
†OUTER WALL ONLY. |
† HEAT SHOCK NO DRIPPING,
(4 HRS. @ 250°C) FLOWING
OR CRACKING
† LOW TEMPERATURE FLEXIBILITY
(4 HRS. @ -55°C) NO CRACKING
ELECTRICAL
DIELECTRIC STRENGTH 900 V/MIL
VOLUME RESISTIVITY 1015OHM-CM |
CHEMICAL
CORROSIVE EFFECT NON-CORROSIVE
FUNGUS RESISTANCE NON-NUTRIENT
WATER ABSORPTION 0.1%
FLUID RESISTANCE
JR4 SKYDROL 600
SOLUTION GASOLINE >1500 PSI
HYDRAULIC FLUID 600 V/MIL |
|
|
* ALSO AVAILABLE AS CUT PIECES, CONSULT FACTORY.
PROPERTIES INFORMATION IS TYPICAL DATA ONLY AND SHOULD NOT BE USED FOR SPECIFICATION REQUIREMENTS.
|
Back to the Tubing Page
Back to the Products Page
