Jaguar J-650 (Viton®) MIL-I-23053/13

Description: Jaguar J-650 shrink tubing is an electrical grade modified fluorolastomer product rated for -55°c to 200°c continuous operation. Jaguar J-650 is very abrasion resistant, flexible and resistant to most fuels, acids and alkalis. It is typically used as a wiring and component cover in aircraft and aerospace applications and chemical plants.

Specification: MIL-I-23053/13; MIL-R-46846, TYPE III, CLASS 1.

Material: Modified Fluorolastomer (Viton® ), 2:1 Shrink Ratio.

Temperature Rating: -55°c to 200°c.

Standard Colors: Black.

Packaging: Reels.*

Ordering Information: Specify Jaguar Catalog No.

* ALSO AVAILABLE AS CUT PIECES, CONSULT FACTORY.

Viton® is a registered trademark of Dupont Dow Elastomers
  ORDER EXPANDED I.D. RECOVERED I.D. RECOVERED WALL
CATALOG NO. SIZE (MINIMUM) (MAXIMUM) (NOMINAL)
REELS in. in. (mm) in. (mm) in. (mm)
J-650 RU 1/8 1/8 .125 (3,18) .062 (1,57) .030 (0,76)
J-650  RU 3/16 3/16 .187 (4,75) .093 (2,36) .035 (0,89)
J-650 RU 1/4 1/4 .250 (6,35) .125 (3,18) .035 (0,89)
J-650  RU 3/8 3/8 .375 (9,53) .187 (4,75) .035 (0,89)
J-650 RU 1/2 1/2 .500 (12,70) .250 (6,35) .035 (0,89)
J-650  RU 5/8 5/8 .625 (15,88) .312 (7,92) .042 (1,07)
J-650 RU 3/4 3/4 .750 (19,05) .375 (9,53) .042 (1,07)
J-650  RU 7/8 7/8 .875 (22,23) .438 (11,13) .049 (1,24)
J-650 RU 1 1 1.000 (25,40) .500 (12,70) .049 (1,24)
J-650  RU 1 1/4 1 1/4 1.250 (31,75) .625 (15,88) .055 (1,40)
J-650 RU 1 1/2 1  1/2 1.500 (38,10) .750 (19,05) .055 (1,40)
J-650  RU 2 2 2.000 (50,80) 1.000 (25,40) .065 (1,65)


PHYSICAL

TENSILE STRENGTH 2400 PSI

ULTIMATE ELONGATION 450%

LONGITUDINAL CHANGE +1,-10%

SPECIFIC GRAVITY 1.7

LOW TEMPERATURE FLEXIBILITY

(4 HRS @ -55°C) NO CRACKING

FLAMMABILITY SELF EXTINGUISH

ELECTRICAL

DIELECTRIC STRENGTH 500 V/MIL

VOLUME RESISTIVITY 1012OHM-CM

CHEMICAL

CORROSIVE EFFECT NON-CORROSIVE

FUEL & OIL RESISTANCE EXCELLENT

SOLVENT RESISTANCE EXCELLENT

ABRASION RESISTANCE EXCELLENT

ACID RESISTANCE EXCELLENT

ALKALI RESISTANCE EXCELLENT

PROPERTIES INFORMATION IS TYPICAL DATA ONLY AND SHOULD NOT BE USED FOR SPECIFICATION REQUIREMENTS.

Back to the Tubing Page
Back to the Products Page