×

    Jaguar J-HDT MIL-I-23053/15

    Description: Jaguar J-HDT tubing is an electrical grade flexible polyolefin over a thin layer of thermoplastic adhesive. It is rated for continuous operation at -55°c to 110°c. When heated, the adhesive sealant melts and is forced into contact with the covered product as the outer tube shrinks. When cool, the sealant forms a flexible barrier against environmental contaminants. Typical applications include sealing of splices and large transitions. The outer jacket is flame retardant. Minimum shrink temperature is 121°c.

    Specification: MIL-I-23053/15, CLASS 1.

    Material: Adhesive Lined Polyolefin, Shrink Ratio 3:1.

    Temperature Rating: -55°C To 110°C.

    Standard Colors: Black;
    J-HDT-0400a, J-HDT-0800a & J-HDT-1100a are also available in red.

    Packaging: Reels.*

    Ordering Information: Specify Jaguar Catalog no. and Color.

            RECOVERED WALL
      APPROXIMATE EXPANDED I.D. RECOVERED I.D. OUTER WALL
    CATALOG NO. CABLE SIZE (MINIMUM) (MAXIMUM) (NOMINAL)
    4 FT. LENGTHS RANGE in. (mm) in. (mm) in. (mm)
    J-HDT-0300A #14-#8  AWG .30 (7,62) .10 (2,5) .08 (2,0)
    J-HDT-0400A #12-#6 AWG .40 (10,2) .15 (3,8) .09 (2,3)
    J-HDT-0800A #8-1/0  AWG .80 (20,3) .20 (5,,1) .11 (2,8)
    J-HDT-1100A #2-4/0 AWG 1.10 (27,9) .37 (9,4) .12 (3,0)
    J-HDT-1500A 3/0-400  AWG 1.50 (38,1) .50 (12,7) .17 (4,3)
    J-HDT-2000A 250-750 MCM 2.00 (50,8) .65 (16,5) .17 (4,3)
    J-HDT-3000A 600-1250  MCM 3.00 (76,2) 1.00 (25,4) .17 (4,3)
    J-HDT-4500A 1000-2500 MCM 4.50 (114,3) 1.50 (38,1) .17 (4,3)
    J-HDT-6000A 2.1"-4.8"O.D. 6.00 (152,4) 1.80 (45,7) .17 (4,3)
    J-HDT-7000A 2.5"-5.6"O.D. 7.00 (177,8) 2.00 (50,8) .17 (4,3)
    *ALSO AVAILABLE AS CUT PIECES, CONSULT FACTORY.

    PHYSICAL

    TENSILE STRENGTH 2400 PSI

    ULTIMATE ELONGATION 475%

    LONGITUDINAL CHANGE +1,-10%

    SECANT MODULUS 14,000 PSI

    SPECIFIC GRAVITY 1.28

    †HEAT AGING ELONGATION

    (7 DAYS @ 175°C) 225%

    †OUTER WALL ONLY.

    		†HEAT SHOCK NO DRIPPING,

    (4 HRS. @ 225°C) CRACKING

    OR FLOWING

    † LOW TEMPERATURE FLEXIBILITY

    (4 HRS @ -55°C) NO CRACKING

    FLAMMABILITY SELF EXTINGUISH

    ELECTRICAL

    DIELECTRIC STRENGTH 500 V/MIL

    VOLUME RESISTIVITY 1014OHM-CM

    		CHEMICAL

    CORROSIVE EFFECT NON-CORROSIVE

    SOLVENT RESISTANCE

    TENSILE STRENGTH 1500 PSI

    DIELECTRIC STRENGTH 200 V/MIL

    WATER ABSORPTION 0.02%

    FUNGUS RESISTANCE NON-NUTRIENT
    PROPERTIES INFORMATION IS TYPICAL DATA ONLY AND SHOULD NOT BE USED FOR SPECIFICATION REQUIREMENTS.

    Back to the Tubing Page
    Back to the Products Page