Jaguar J-MDT MIL-I-23053/15

Description: Jaguar J-mdt tubing is an electrical grade flexible polyolefin over a thin layer of thermoplastic adhesive. It is rated for continuous operation at -55°c to 110°c. When heated, the adhesive sealant melts and is forced into contact with the covered product as the outer tube shrinks. When cool, the sealant forms a flexible barrier against environmental contaminants. Typical applications include sealing of splices and large transitions. The outer jacket is flame retardant. Minimum shrink temperature is 121°c.

Specification: MIL-I-23053/15, CLASS 2.

Material: Adhesive Lined Polyolefin, Shrink Ratio 3:1.

Temperature Rating: -55°c to 110°c.

Standard Colors: Black;
J-MDT-0400A, J-MDT-0800A & J-MDT-1100A are also available in red.

Packaging: 4 Foot Lengths.*

Ordering Information: Specify Jaguar Catalog No. and Color.

ALSO AVAILABLE AS CUT PIECES, CONSULT FACTORY.
        RECOVERED WALL
  APPROXIMATE EXPANDED I.D. RECOVERED I.D. OUTER WALL
CATALOG NO. CABLE SIZE (MINIMUM) (MAXIMUM) (NOMINAL)
4 FT. LENGTHS RANGE in. (mm) in. (mm) in. (mm)
J-MDT-0400A #12-#6  AWG .40 (10,2) .15 (3,8) .09 (2,3)
J-MDT-0800A #8-#3 AWG .80 (20,3) .22 (5,,6) .10 (2,5)
J-MDT-1100A #2-2/0  AWG 1.10 (27,9) .37 (9,4) .10 (2,5)
J-MDT-1300A #1-4/0 AWG 1.30 (33,0) .43 (10,9) .10 (2,5)
J-MDT-1500A 1/0-250  MCM 1.50 (38,1) .50 (12,7) .10 (2,5)
J-MDT-1700A 4/0-400 MCM 1.70 (43,2) .60 (15,2) .10 (2,5)
J-MDT-2000A 300-500  MCM 2.00 (50,8) .75 (19,1) .10 (2,5)
J-MDT-3000A 600-1250 MCM 3.00 (76,2) 1.00 (25,4) .12 (3,0)
J-MDT-4300A 1000-2500  MCM 4.30 (109,2) 1.50 (38,1) .15 (3,8)

PHYSICAL

TENSILE STRENGTH 2400 PSI

ULTIMATE ELONGATION 475%

LONGITUDINAL CHANGE +1,-10%

SECANT MODULUS 14,000 PSI

SPECIFIC GRAVITY 1.28

HEAT AGING ELONGATION

(7 DAYS @ 175°C) 225%

OUTER WALL ONLY.

HEAT SHOCK NO DRIPPING,

(4 HRS. @ 225°C) CRACKING

OR FLOWING

LOW TEMPERATURE FLEXIBILITY

(4 HRS @ -55°C) NO CRACKING

FLAMMABILITY SELF EXTINGUISH

ELECTRICAL

DIELECTRIC STRENGTH 500 V/MIL

VOLUME RESISTIVITY 1014OHM-CM

CHEMICAL

CORROSIVE EFFECT NON-CORROSIVE

SOLVENT RESISTANCE

TENSILE STRENGTH 1500 PSI

DIELECTRIC STRENGTH 200 V/MIL

WATER ABSORPTION 0.2%

FUNGUS RESISTANCE NON-NUTRIENT

PROPERTIES INFORMATION IS TYPICAL DATA ONLY AND SHOULD NOT BE USED FOR SPECIFICATION REQUIREMENTS.

Back to the Tubing Page
Back to the Products Page